TT2 curtain hoist system with manual wire rope drive
TT2 curtain hoist system with manual wire rope drive
TT2 curtain hoist system with manual wire rope drive
Curtain rail with manual cable pull for very large curtains, backdrops, dividing curtains, blackout curtains in film and television studios, multi-purpose halls, stages, theatres, etc.
Even very high and wide curtains can be opened and closed with the direct pulling of the pull rope. The large load-bearing capacity of the TT2 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.
Technical data and the load table can be found at the bottom of this page after the products. AÜ 110923
For the assembly drawings, click on the desired configuration:
When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.
The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with Overlap".
BASE WITHOUT LOAD CONNECTION ArtID 1800635 is the central element of a modular, TÜV-certified ceiling mount system designed for the safe and permanent installation of curtain tracks, load bars, and
The load attachment 1800637 is specifically designed for mounting TT rails with external rope guidance and complements the modular telescopic suspension system (Art. 1800635) with a solution for
Aluminum track, black anodizedTrack length 6 mCombination track for use with external drive cables.Can be used as a hand operated, pull-cord and electric curtain track
Black galvanizedFor use with: TT2 pull-cord curtain track system with external cable, TT2 electric curtain track system with external cableConsists of: 4 ball bearing carrier rollers, 4 ball bearing
Black anodizedFor use with: TT2 pull-cord curtain track system with external cable and electric curtain track system with external cableConsists of: 20 cm overlap arm, 4 ball bearing carrier rollers,
black galvanizedUsed with: all TT1, TT2, XT3 systemsConsists of: base body, mounting blocksApplication: for parallel rail alignment, e.g. in overlap sections
SUSPENSION BRACKET FOR OUTSIDE GUIDED CORD TT1-17.0
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
Black anodizedFor use with: TT1 pull-cord curtain track system with internal cable, TT2 pull-cord curtain track system with external cableConsists of: Pulley, weight and screwsUse: For tensioning the
Black anodisedFor use with: TT1 pull-cord curtain track system with internal cable, TT2 pull-cord curtain track system with external cableConsists of: Mounting base plate, belt, pulley, tensioner and
silver anodizedUsed with: all TT1, TT2 and XT3 systemsConsists of: mounting block base body with M8 threadApplication: for mounting accessories into the top groove of the rail profile. Can be