TT1 curtain hoist system with manual wire rope drive
TT1 curtain hoist system with manual wire rope drive
TT1 curtain hoist system with manual wire rope drive
Curtain rail with manual cable pull for very large curtains, backdrops, dividing curtains, blackout curtains in film and television studios, multi-purpose halls, stages, theatres, etc.
Even very high and wide curtains can be opened and closed with the direct pulling of the pull rope. The large load-bearing capacity of the TT1 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.
Technical data and the load table can be found at the bottom of this page after the products.
For the assembly drawings, click on the desired configuration:
When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.
The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with overlapper".
Aluminum track, black anodizedTrack length: 6 mCombination track for use with both internal and external drive cables.Suitable for hand-operated, pull-cord, and electric curtain systems
black anodizedUsed for: TT1 drag system, cord system with internal rope, and electric system with internal rope, TT2 drag systemIncludes: offset arm 20 cm, 4 ball-bearing load rollers, 4 ball-bearing
Black anodizedFor use with: TT1 hand operated curtain track system, pull-cord curtain track system with internal drive cable, electric curtain track system with internal drive cable, TT2 hand
BlackFor use with: TT1 pull-cord curtain track system with internal drive cable, TT1 electric curtain track system with internal drive cableConsists of: Plastic glide body, worm screwsConnects the
black galvanizedUsed with: all TT1, TT2, XT3 systemsConsists of: base body, mounting blocksApplication: for parallel rail alignment, e.g. in overlap sections
BlackFor use with: TT1 pull-cord curtain track system with internal and external cable, electric curtain track system with internal and external cable, TT2 pull-cord curtain track system with
Black anodizedFor use with: TT1 pull-cord curtain track system with internal cable, TT2 pull-cord curtain track system with external cableConsists of: Pulley, weight and screwsUse: For tensioning the
Black anodisedFor use with: TT1 pull-cord curtain track system with internal cable, TT2 pull-cord curtain track system with external cableConsists of: Mounting base plate, belt, pulley, tensioner and
silver anodizedUsed with: all TT1, TT2 and XT3 systemsConsists of: mounting block base body with M8 threadApplication: for mounting accessories into the top groove of the rail profile. Can be
Die Werte gelten bei der Anwendung des Mindestradius der Bögen von 100cm und Bogenwinkel von 90°. Überschreitet Ihre Anlage die oben angeführten Standardwerte, dann kontaktieren und Sie uns bitte.
