TT1 curtain hoist system with electric clip-on drive UNIVERSAL RS 3P
TT1 curtain hoist system with electric clip-on drive UNIVERSAL RS 3P
TT1 curtain hoist system with electric plug-in drive Universal RS 3P
TT1 curtain rail with electric clip-on drive for large curtains, dividing curtains, blackout curtains and acoustic curtains in film, television studio, multi-purpose hall, stage, theatre, etc.
Large curtains are moved by the RS-3P electric drive on the TT1 heavy curtain rail. The large load-bearing capacity of the TT1 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.
The compact electric actuator UNIVERSAL RS 3P is attached directly to a rail end and is used to move curtains with a rope speed of up to 40cm/sec and curtain weights of 170kg. .
Technical data and the load table can be found at the bottom of this page after the products.
When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.
The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with Overlap".
Aluminum track, black anodizedTrack length: 6 mCombination track for use with both internal and external drive cables.Suitable for hand-operated, pull-cord, and electric curtain systems
Black anodizedFor use with: TT1 pull-cord curtain track system with external cable and electric curtain track system with external cableConsists of: 4 ball bearing carrier rollers, 4 ball bearing
Black anodizedFor use with: TT1 pull-cord curtain track system with external cable and electric curtain track system with external cableConsists of: 20 cm overlap arm, 4 ball bearing carrier rollers,
black anodizedFor use with: TT1 electric curtain track system with external cableConsists of: Bracket for limit switch, 4 ball bearing carrier rollers, 4 ball bearing support rollers, 2 guide rollers
Black anodizedFor use with: TT1 electric curtain track system with external cableConsists of: Bracket for limit switch, 20 cm overlap arm, 4 ball bearing carrier rollers, 4 ball bearing support
black galvanizedFor use with: TT1 electric curtain track system with internal and external cableConsists of: Mounting plate, mounting block, galvanized black screws
black galvanizedUsed with: all TT1, TT2, XT3 systemsConsists of: base body, mounting blocksApplication: for parallel rail alignment, e.g. in overlap sections
SUSPENSION BRACKET FOR OUTSIDE GUIDED CORD TT1-17.0
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
BlackFor use with: TT1 pull-cord curtain track system with internal and external cable, electric curtain track system with internal and external cable, TT2 pull-cord curtain track system with
silver anodizedUsed with: all TT1, TT2 and XT3 systemsConsists of: mounting block base body with M8 threadApplication: for mounting accessories into the top groove of the rail profile. Can be
