Technical details

  • special screen for effect projections
  • flame-retardant
  • EN13501 B-s1-d0
  • EN13773 C1
  • 100% vinyl
  • predominantly for tensioned screens or backdrops
  • width 220 cm
  • transparent
Please note the warnings!


transparent matted

Effect foil with a projection picture similar to a slab of glass covered in sand.

Area of use

  • Theatre horizons
  • Projection screens for trade fairs events, shows
  • Effect foil
excl. incl. 20% vat
from 1 linear meters €32.30 €38.76
from 10 linear meters €23.70 €28.44
from 100 linear meters €18.95 €22.74
excl. Shipping Cost
Please request a quote. We will calculate the shipping cost for you and send you our proposal per email that can be payed online.

excl. incl. 20% vat
linear meters from €18.95 €22.74
excl. Shipping Cost


Customers who used the product indicated, these products find handy:


Effect foil with a projection picture similar to a slab of glass covered in sand.


Area of use

  • Theatre horizons
  • Projection screens for trade fairs events, shows
  • Effect foil


General instructions and warnings for projection foils
Current version: 01 January 2016

  1. Creases due to folding in storage:
    Generally projection foils are - if not offered separately - packaged folded up and sent off. In general, these creases disappear after opening and stretching the projection foils on all sides. If it is at all technically possible, projection foils can be sent rolled up too – for an additional fee for packaging and transport. This increases the likelihood of the foils being crease-free, or that the creases will disappear during the recovery process. The recovery process depends on room temperature, assembly stress and time. In the case of remaining visible creases, this does not constitute a reduction in projection foil quality.

  2. Intended use for projection foils
    Depending on the type of product used, projection foils are optimised for use in incident or back light projection for customary light incidence angles for video, slide or film projection. A smooth flat surface can only be achieved by stretching the projection foil on all sides with equal tension. The development of ripples and warping does not constitute a reduction in projection foil quality if the projection foil is not tensioned evenly on one or more sides. Use with strip or side lighting: even tension on all sides is mandatory. Visible remaining creases, seams and warping due to tension or assembly do not constitute a reduction in projection foil quality.

  3. Evaluating colour deviations and variations in brightness:
    Projection foils are manufactured in large-scale PVC industry plants and are subject to strict quality controls. However, there are variations within this industry too. These are very slight and are not noticeable in normal light conditions. These deviations are only visible in certain application conditions. Please note that colour deviations only become visible when the viewing angle corresponding to half-light density is surpassed; this is dependent on technical factors and does not constitute a reduction in quality.

  4. Usage for rolling projection screens:
    Tüchler ® can provide all projection foils as rolling projection screens with a Superflat (tab-tension) finish. Mounting of projection foils on rolling projection screens by third parties is at your own risk. In this respect. Particularly if non-tensionable (standard welded) screens are used wtih (electric-)rollers waves, pleates or even damages are to expect.  Tüchler® remains free from all liability and/or damage compensation claims.

  5. Dimension stability and tolerances:
    Projection foils are made of thermoplastic material. Therefore, the material’s stretching properties, softness and measurements vary according to changes in room temperature. Thus, cut products are subject to a tolerance of +- 2% at 22°C room temperature.

  6. Projection foil shelf life:
    With correct usage and storage at room temperature, you will be able to use your projection foil for many years. Projection foils contain softening agents which are exuded over time. Therefore after a few years, colour change, yellowing, brittleness, oily patches on the surface can occur, and it may tear more easily. These appearances are not defects covered by warranty; these are customary, material-related effects due to aging.

  7. Exclusion of DIN and other photography or cinematography standards:
    The projection foil has been optimised for use in theatres, opera, events, trade fairs, tours and similar and therefore different types are distinguished by colour, projection behaviour, sturdiness and flammability. The foil was not developed for use in cinemas or similar. Therefore, all evaluations based on norms for projection surfaces, in particular DIN, and claims based thereupon are excluded, unless this was expressly agreed upon in writing.




    Downloads are only visible for registered and verified customers.

    Your inquiry

    • Bitte geben Sie bei Preisanfragen Ihre Adresse bekannt, um den Vorgang zu beschleunigen:

    * Required Fields

    PROJECTION SCREEN FROST. Effect foil with a projection picture similar to a slab of glass covered in sand.

    • Price: €22.74 - In stock

    Sie haben Fragen zu Produkten, Dienstleistungen, Konfektionen oder Funktionen des Webshops?

    Ich helfe Ihnen gerne persönlich weiter!

    Rufen Sie mich während der Bürozeiten

    Mo-Do 8:00 – 12:15 13:00-17:00
    Fr 8:00 – 12:15 13:00-15:00

    einfach an oder senden Sie mir ein mail!

    Michaela Aimienoho

    t: 01 400 10 - 26
    f: 01 400 10 - 20
    Tatiana Kaplun

    t: 01 400 10 - 32
    f: 01 400 10 - 20
    Thomas Zizala

    t: 01 400 10 - 21
    f: 01 400 10 - 20
    Thomas Hradil

    t: 01 400 10 - 31
    f: 01 400 10 - 20
    Alexander Sokol

    t: 01 400 10 - 99
    f: 01 400 10 - 20

    Brauchen Sie Hilfe?