Spin cable for very large horizons, backdrops, dividing curtains, blackout curtains in film and television studios, multi-purpose halls, stages, theatres, etc.

Even 20m high curtains can be moved manually with ease. The large load-bearing capacity of the TT1 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.

The TT1 curtain pull system is used as a centrifugal hoist in TV and film studios for capturing and moving large studio horizons, in theatre and opera for background curtains, cycloramas and panoramas, as well as in other large venues with similar requirements.

For curtain hoist system TT1 configured as a centrifugal hoist, rail switches are available on request.

Specifications:
Maximum weight per linear meter: 55kg
Maximum rail length: unlimited

For the assembly drawings, click on the desired configuration:

Configuration with overlap

When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.

TT1-Schiene VORHANGZUGANLAGE ALS MANUELLER SCHLEUDERZUG MIT ÜBERGREIFER 1
TT1-Schiene VORHANGZUGANLAGE ALS MANUELLER SCHLEUDERZUG MIT ÜBERGREIFER 3
TT1-Schiene VORHANGZUGANLAGE ALS MANUELLER SCHLEUDERZUG MIT ÜBERGREIFER_aus_pdf

Configuration with overlapping of rail profiles

The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with Overlap".

TT1 VORHANGZUGANLAGE ALS MANUELLER SCHLEUDERZUG MIT ÜBERLPPUNG v1.0 1
TT1 VORHANGZUGANLAGE ALS MANUELLER SCHLEUDERZUG MIT ÜBERLPPUNG v1.0 3